Friday, May 27, 2011
exim dead but subsys locked
You can fix this issue by removing the eximdisable file from /etc/eximdisable
Sunday, May 15, 2011
FFMPEG and its scripts
This is a tutorial to enable video sharing support on Centos servers.
This should install ffmpeg, mplayer, mencoder, flvtool2, yamdi, x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid, mediainfo, mp4box, neroaacenc . These tools will enable on your server:
video and audio conversion
thumbnail generation
FLV meta injection (flvtool2, yamdi)
extra codecs (x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid)
This is functional and we update it each time we configure a new server.
Installation is done using the “root” account.
Attention: If you copy and paste commands below, make sure “-” are not converted to “.”. If these get converted, edit “.” back to “-”. Some options use 2 * “-”.
Some prerequisites:
yum install gcc gcc-c++ automake autoconf libtool yasm git subversion
yum install zlib-devel libmad-devel libvorbis-devel libtheora-devel lame-devel faac-devel a52dec-devel xvidcore-devel freetype-devel
yum install libogg zlib-devel libtool
rpm -ivh http://rpm.livna.org/livna-release.rpm
yum install yasm
yum install libogg libogg-devel libvorbis libvorbis-devel
The quick way to setup ffmpeg, mplayer, mencoder:
rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
or if you have 64bit server
rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
yum -y install ffmpeg ffmpeg-devel mplayer mencoder
Edit the /etc/ld.so.conf file and add the following lines:
/usr/local/lib
/usr/lib
GIT
(required to get X264)
yum install curl-devel expat-devel gettext-devel openssl-devel zlib-devel
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-1.6.0.4.tar.gz
tar -zxvf git-1.6.0.4.tar.gz
cd git-1.6.0.4
make prefix=/usr/local all
make prefix=/usr/local/ install
git –version
And git manpages:
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-manpages-1.6.0.4.tar.gz
cd /usr/local/share/man
tar -zxvf /usr/local/src/git-manpages-1.6.0.4.tar.gz
YASM
YASM is a modular assembler, it is required by the x264 package.
cd /usr/local/src/
wget http://www.tortall.net/projects/yasm/releases/yasm-0.7.0.tar.gz
tar zfvx yasm-0.7.0.tar.gz
cd yasm-0.7.0
./configure
make && make install
cd ..
X264
cd /usr/local/src/
git clone git://git.videolan.org/x264.git
cd /usr/local/src/x264
./configure –enable-shared –prefix=/usr
make && make install
ls -s /usr/local/lib/libx264.so /usr/lib/libx264.so
Essential Codecs
cd /usr/local/src/
wget http://www.mplayerhq.hu/MPlayer/releases/codecs/essential-20071007.tar.bz2
tar xjvf essential-20071007.tar.bz2
mkdir /usr/local/lib/codecs/
mv essential-20071007/ /usr/local/lib/codecs/
chmod -R 755 /usr/local/lib/codecs/
Or all codecs:
cd /usr/local/src/
wget http://www.mplayerhq.hu/MPlayer/releases/codecs/all-20100303.tar.bz2
tar xjvf all-20100303.tar.bz2
mkdir /usr/local/lib/codecs/
mv all-20100303 /usr/local/lib/codecs/
LAME
cd /usr/local/src/
wget http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Flame%2Ffiles%2F&ts=1285175656&use_mirror=switch
tar zxvf lame-3.98.4.tar.gz
cd /usr/local/src/lame-3.98.4
./configure
make && make install
OGG
cd /usr/local/src/
wget downloads.xiph.org/releases/ogg/libogg-1.1.3.tar.gz
tar zxvf libogg-1.1.3.tar.gz
cd /usr/local/src/libogg-1.1.3
./configure –enable-shared && make && make install
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
export PKG_CONFIG_PATH
VORBIS
cd /usr/local/src/
wget downloads.xiph.org/releases/vorbis/libvorbis-1.1.2.tar.gz
tar zxvf libvorbis-1.1.2.tar.gz
cd /usr/local/src/libvorbis-1.1.2
./configure && make && make install
Theora
cd /usr/local/src/
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
tar jxvf libtheora-1.1.1.tar.bz2
cd /usr/local/src/libtheora-1.1.1
./configure –prefix=/usr --enable-shared
make && make install
ls -s /usr/local/lib/libtheora.so /usr/lib/libtheora.so
FAAC
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz
tar zxvf faac-1.28.tar.gz
cd /usr/local/src/faac-1.28
./configure –prefix=/usr
make && make install
FAAD2
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faad2-2.6.1.tar.gz
tar zxf faad2-2.6.1.tar.gz
cd faad2
autoreconf -vif
./configure –disable-drm –disable-mpeg4ip
make && make install
OpenJPEG
cd /usr/local/src/
wget http://openjpeg.googlecode.com/files/openjpeg_v1_3.tar.gz
tar zxvf openjpeg_v1_3.tar.gz
cd OpenJPEG_v1_3
make && make install
ldconfig
Xvid
cd /usr/local/src/
wget http://downloads.xvid.org/downloads/xvidcore-1.2.1.tar.gz
tar zxfv xvidcore-1.2.1.tar.gz
cd /usr/local/src/xvidcore/build/generic
./configure --enable-shared
make && make install
ls -s /usr/local/lib/libxvidcore.so.4.2 /usr/lib/libxvidcore.so.4.2
Before installing ffmpeg, setup some linking for scripts that look in certain locations for codecs:
ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51
ln -s /usr/local/lib/libavdevice.so.52 /usr/lib/libavdevice.so.52
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so.0.3.10
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so.80
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so
FFMPEG (download latest from SVN)
export TMPDIR=$HOME/tmp
export LD_LIBRARY_PATH=/usr/local/lib/
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
cd /usr/local/src/ffmpeg/
./configure --enable-libfaac --enable-shared --enable-memalign-hack --enable-gpl --enable-libtheora --enable-libmp3lame --enable-libopenjpeg --enable-libvorbis --enable-libx264 --enable-libxvid --enable-nonfree --enable-postproc --enable-avfilter --enable-swscale
make && make install
ln -s /usr/local/bin/ffmpeg /usr/bin/ffmpeg
FFMPEG configure options use 2 x “-”.
MPLAYER
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
cd /usr/local/src/mplayer
svn update
cd /usr/local/src/mplayer
./configure && make && make install
ln -s /usr/local/bin/mencoder /usr/bin/mencoder
ln -s /usr/local/bin/mplayer /usr/bin/mplayer
FLVTOOL2
First install Ruby from WHM.
cd /usr/local/src/
wget rubyforge.org/frs/download.php/9225/flvtool2_1.0.5_rc6.tgz
tar zxvf flvtool2_1.0.5_rc6.tgz
cd /usr/local/src/flvtool2_1.0.5_rc6/
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install
YAMDI
cd /usr/local/src/
wget http://downloads.sourceforge.net/project/yamdi/yamdi/1.4/yamdi-1.4.tar.gz?use_mirror=ufpr
tar zxf yamdi-1.4.tar.gz
cd yamdi-1.4
gcc yamdi.c -o yamdi -O2 -Wall
mv yamdi /usr/bin/
yamdi -h
INSTALLATION RESULTS
mencoder: /usr/local/bin/mencoder
mplayer: /usr/local/bin/mplayer
yamdi: /usr/bin/yamdi
Add these shortcuts to /usr/bin if you need these there by default:
mencoder to /usr/local/bin/mencoder
mplayer to /usr/local/bin/mplayer
SuPHP fix
With suphp “env -i” is required when executing php scripts.
exec(“env -i /usr/bin/php ” . $cmd. ‘>/dev/null &’);
MediaInfo
http://mediainfo.sourceforge.net/en/Download/CentOS
wget http://downloads.sourceforge.net/zenlib/libzen0-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/zenlib/libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/mediainfo-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libzen0-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
rpm -vi mediainfo-0.7.32-1.i386.CentOS_5.rpm
ln -s /usr/bin/mediainfo /usr/local/bin/mediainfo
MP4Box
yum -y install freetype-devel SDL-devel freeglut-devel
wget -c http://mirror.ffmpeginstaller.com/source/gpac/gpac-full-0.4.5.tar.gz
tar -xzf gpac-full-0.4.5.tar.gz
cd gpac
./configure –prefix=/usr/local/cpffmpeg/ –extra-cflags=-I/usr/local/cpffmpeg/include/ –extra-ldflags=-L/usr/local/cpffmpeg/lib –disable-wx –strip
make && make lib && make apps && make install lib && make install
cp bin/gcc/libgpac.so /usr/lib
ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/local/bin/MP4Box
ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/bin/MP4Box
install -m644 bin/gcc/libgpac.so /usr/local/lib/libgpac.so
chmod +x /usr/local/lib/libgpac.so
ldconfig
neroAacEnc
wget ftp://ftp6.nero.com/tools/NeroDigitalAudio.zip
unzip NeroDigitalAudio.zip -d nero
cd nero/linux
sudo install -D -m755 neroAacEnc /usr/local/bin
ln -s /usr/local/bin/neroAacEnc /usr/bin/neroAacEnc
uploadprogress
cd /usr/local/src
wget http://pecl.php.net/get/uploadprogress-1.0.0.tgz
tar -zxvf uploadprogress-1.0.0.tgz
cd uploadprogress-1.0.0
phpize
./configure && make && make install
Edit /usr/lib/php.ini and add:
extension = “uploadprogress.so”
This should install ffmpeg, mplayer, mencoder, flvtool2, yamdi, x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid, mediainfo, mp4box, neroaacenc . These tools will enable on your server:
video and audio conversion
thumbnail generation
FLV meta injection (flvtool2, yamdi)
extra codecs (x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid)
This is functional and we update it each time we configure a new server.
Installation is done using the “root” account.
Attention: If you copy and paste commands below, make sure “-” are not converted to “.”. If these get converted, edit “.” back to “-”. Some options use 2 * “-”.
Some prerequisites:
yum install gcc gcc-c++ automake autoconf libtool yasm git subversion
yum install zlib-devel libmad-devel libvorbis-devel libtheora-devel lame-devel faac-devel a52dec-devel xvidcore-devel freetype-devel
yum install libogg zlib-devel libtool
rpm -ivh http://rpm.livna.org/livna-release.rpm
yum install yasm
yum install libogg libogg-devel libvorbis libvorbis-devel
The quick way to setup ffmpeg, mplayer, mencoder:
rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
or if you have 64bit server
rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
yum -y install ffmpeg ffmpeg-devel mplayer mencoder
Edit the /etc/ld.so.conf file and add the following lines:
/usr/local/lib
/usr/lib
GIT
(required to get X264)
yum install curl-devel expat-devel gettext-devel openssl-devel zlib-devel
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-1.6.0.4.tar.gz
tar -zxvf git-1.6.0.4.tar.gz
cd git-1.6.0.4
make prefix=/usr/local all
make prefix=/usr/local/ install
git –version
And git manpages:
cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-manpages-1.6.0.4.tar.gz
cd /usr/local/share/man
tar -zxvf /usr/local/src/git-manpages-1.6.0.4.tar.gz
YASM
YASM is a modular assembler, it is required by the x264 package.
cd /usr/local/src/
wget http://www.tortall.net/projects/yasm/releases/yasm-0.7.0.tar.gz
tar zfvx yasm-0.7.0.tar.gz
cd yasm-0.7.0
./configure
make && make install
cd ..
X264
cd /usr/local/src/
git clone git://git.videolan.org/x264.git
cd /usr/local/src/x264
./configure –enable-shared –prefix=/usr
make && make install
ls -s /usr/local/lib/libx264.so /usr/lib/libx264.so
Essential Codecs
cd /usr/local/src/
wget http://www.mplayerhq.hu/MPlayer/releases/codecs/essential-20071007.tar.bz2
tar xjvf essential-20071007.tar.bz2
mkdir /usr/local/lib/codecs/
mv essential-20071007/ /usr/local/lib/codecs/
chmod -R 755 /usr/local/lib/codecs/
Or all codecs:
cd /usr/local/src/
wget http://www.mplayerhq.hu/MPlayer/releases/codecs/all-20100303.tar.bz2
tar xjvf all-20100303.tar.bz2
mkdir /usr/local/lib/codecs/
mv all-20100303 /usr/local/lib/codecs/
LAME
cd /usr/local/src/
wget http://downloads.sourceforge.net/project/lame/lame/3.98.4/lame-3.98.4.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Flame%2Ffiles%2F&ts=1285175656&use_mirror=switch
tar zxvf lame-3.98.4.tar.gz
cd /usr/local/src/lame-3.98.4
./configure
make && make install
OGG
cd /usr/local/src/
wget downloads.xiph.org/releases/ogg/libogg-1.1.3.tar.gz
tar zxvf libogg-1.1.3.tar.gz
cd /usr/local/src/libogg-1.1.3
./configure –enable-shared && make && make install
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
export PKG_CONFIG_PATH
VORBIS
cd /usr/local/src/
wget downloads.xiph.org/releases/vorbis/libvorbis-1.1.2.tar.gz
tar zxvf libvorbis-1.1.2.tar.gz
cd /usr/local/src/libvorbis-1.1.2
./configure && make && make install
Theora
cd /usr/local/src/
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2
tar jxvf libtheora-1.1.1.tar.bz2
cd /usr/local/src/libtheora-1.1.1
./configure –prefix=/usr --enable-shared
make && make install
ls -s /usr/local/lib/libtheora.so /usr/lib/libtheora.so
FAAC
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz
tar zxvf faac-1.28.tar.gz
cd /usr/local/src/faac-1.28
./configure –prefix=/usr
make && make install
FAAD2
cd /usr/local/src/
wget http://downloads.sourceforge.net/faac/faad2-2.6.1.tar.gz
tar zxf faad2-2.6.1.tar.gz
cd faad2
autoreconf -vif
./configure –disable-drm –disable-mpeg4ip
make && make install
OpenJPEG
cd /usr/local/src/
wget http://openjpeg.googlecode.com/files/openjpeg_v1_3.tar.gz
tar zxvf openjpeg_v1_3.tar.gz
cd OpenJPEG_v1_3
make && make install
ldconfig
Xvid
cd /usr/local/src/
wget http://downloads.xvid.org/downloads/xvidcore-1.2.1.tar.gz
tar zxfv xvidcore-1.2.1.tar.gz
cd /usr/local/src/xvidcore/build/generic
./configure --enable-shared
make && make install
ls -s /usr/local/lib/libxvidcore.so.4.2 /usr/lib/libxvidcore.so.4.2
Before installing ffmpeg, setup some linking for scripts that look in certain locations for codecs:
ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51
ln -s /usr/local/lib/libavdevice.so.52 /usr/lib/libavdevice.so.52
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so.0.3.10
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so.80
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so
FFMPEG (download latest from SVN)
export TMPDIR=$HOME/tmp
export LD_LIBRARY_PATH=/usr/local/lib/
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
cd /usr/local/src/ffmpeg/
./configure --enable-libfaac --enable-shared --enable-memalign-hack --enable-gpl --enable-libtheora --enable-libmp3lame --enable-libopenjpeg --enable-libvorbis --enable-libx264 --enable-libxvid --enable-nonfree --enable-postproc --enable-avfilter --enable-swscale
make && make install
ln -s /usr/local/bin/ffmpeg /usr/bin/ffmpeg
FFMPEG configure options use 2 x “-”.
MPLAYER
cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
cd /usr/local/src/mplayer
svn update
cd /usr/local/src/mplayer
./configure && make && make install
ln -s /usr/local/bin/mencoder /usr/bin/mencoder
ln -s /usr/local/bin/mplayer /usr/bin/mplayer
FLVTOOL2
First install Ruby from WHM.
cd /usr/local/src/
wget rubyforge.org/frs/download.php/9225/flvtool2_1.0.5_rc6.tgz
tar zxvf flvtool2_1.0.5_rc6.tgz
cd /usr/local/src/flvtool2_1.0.5_rc6/
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install
YAMDI
cd /usr/local/src/
wget http://downloads.sourceforge.net/project/yamdi/yamdi/1.4/yamdi-1.4.tar.gz?use_mirror=ufpr
tar zxf yamdi-1.4.tar.gz
cd yamdi-1.4
gcc yamdi.c -o yamdi -O2 -Wall
mv yamdi /usr/bin/
yamdi -h
INSTALLATION RESULTS
mencoder: /usr/local/bin/mencoder
mplayer: /usr/local/bin/mplayer
yamdi: /usr/bin/yamdi
Add these shortcuts to /usr/bin if you need these there by default:
mencoder to /usr/local/bin/mencoder
mplayer to /usr/local/bin/mplayer
SuPHP fix
With suphp “env -i” is required when executing php scripts.
exec(“env -i /usr/bin/php ” . $cmd. ‘>/dev/null &’);
MediaInfo
http://mediainfo.sourceforge.net/en/Download/CentOS
wget http://downloads.sourceforge.net/zenlib/libzen0-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/zenlib/libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/mediainfo-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libzen0-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
rpm -vi mediainfo-0.7.32-1.i386.CentOS_5.rpm
ln -s /usr/bin/mediainfo /usr/local/bin/mediainfo
MP4Box
yum -y install freetype-devel SDL-devel freeglut-devel
wget -c http://mirror.ffmpeginstaller.com/source/gpac/gpac-full-0.4.5.tar.gz
tar -xzf gpac-full-0.4.5.tar.gz
cd gpac
./configure –prefix=/usr/local/cpffmpeg/ –extra-cflags=-I/usr/local/cpffmpeg/include/ –extra-ldflags=-L/usr/local/cpffmpeg/lib –disable-wx –strip
make && make lib && make apps && make install lib && make install
cp bin/gcc/libgpac.so /usr/lib
ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/local/bin/MP4Box
ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/bin/MP4Box
install -m644 bin/gcc/libgpac.so /usr/local/lib/libgpac.so
chmod +x /usr/local/lib/libgpac.so
ldconfig
neroAacEnc
wget ftp://ftp6.nero.com/tools/NeroDigitalAudio.zip
unzip NeroDigitalAudio.zip -d nero
cd nero/linux
sudo install -D -m755 neroAacEnc /usr/local/bin
ln -s /usr/local/bin/neroAacEnc /usr/bin/neroAacEnc
uploadprogress
cd /usr/local/src
wget http://pecl.php.net/get/uploadprogress-1.0.0.tgz
tar -zxvf uploadprogress-1.0.0.tgz
cd uploadprogress-1.0.0
phpize
./configure && make && make install
Edit /usr/lib/php.ini and add:
extension = “uploadprogress.so”
Subscribe to:
Posts (Atom)